EZCAD2 is a widely used software for controlling fiber laser marking machines, especially those equipped with a Galvo head and BJJCZ (Beijing JCZ) control boards, such as the popular LMCV4 series. It allows users to design, edit, and execute marking jobs using various vector and bitmap formats. If you’re new to laser engraving or setting up your machine, knowing how to properly download and install EZCAD2 is crucial for smooth operation and compatibility.
Step-by-Step Guide to Downloading EZCAD2
1. Identify Your Laser Control Board
Before downloading EZCAD2, confirm the type of control board used in your laser machine. EZCAD2 only works with LMC series boards (like LMCV4-FIBER, LMCV4-USB, etc.). These are typically installed in fiber laser marking machines. If you are using newer hardware or want additional features like 3D marking, EZCAD3 may be more appropriate, but it requires a different board.
2. Download from Official Source or Trusted Vendors
The safest place to download EZCAD2 is from the official website of BJJCZ or from a reputable laser machine supplier. Here’s how you can do it:
-
Visit the official BJJCZ site: https://www.laserchina.com/
-
Navigate to the “Download” section or product support page.
-
Look for EZCAD2 (usually version 2.14.10 or 2.14.11 is the most stable).
-
Download the ZIP file that includes:
-
The EZCAD2 application
-
The driver for the LMC board
-
Configuration files
-
You can also find the software on vendor websites like Cloudray, OMTech, or Amazon sellers who supply fiber lasers. Just ensure the link is not outdated or modified.
3. Extract and Install
Once downloaded:
-
Unzip the downloaded folder using WinRAR or 7-Zip.
-
Plug in your laser machine’s USB cable to your computer.
-
Install the USB driver manually if it doesn’t auto-install:
-
Go to Device Manager
-
Locate the unknown USB device (LMC USB Board)
-
Right-click > Update Driver > Browse to the “driver” folder in EZCAD2 directory
-
-
Once the driver is installed, open EZCAD2.exe inside the extracted folder.
EZCAD2 doesn’t require installation like traditional programs. It runs directly from the folder, so you can even keep it on a USB drive.
Tips for First-Time Users
-
Run as Administrator: Right-click EZCAD2.exe and select “Run as Administrator” to avoid permission issues.
-
Set Parameters: You’ll need to configure the FIBER.cfg file or select your laser source and lens parameters in the software.
-
File Compatibility: EZCAD2 supports AI, DXF, PLT, BMP, JPG, and many more file types.
-
Laser Safety: Ensure your laser is in a safe state before starting. Misconfigured parameters can cause hardware damage or personal injury.
Troubleshooting
-
If the software doesn’t detect the laser, check that the correct driver is installed and the USB port is working.
-
For red light preview issues, make sure the marking speed and delay parameters are properly configured.
-
If EZCAD2 crashes, update your graphics drivers or try compatibility mode.
Conclusion
Downloading and installing EZCAD2 is a straightforward process, but it must be done carefully to ensure full functionality with your laser marking machine. Always get the software from official or trusted sources, ensure the correct driver installation, and configure your laser parameters properly. Once set up, EZCAD2 offers a powerful and reliable platform for high-precision marking tasks across a variety of industries.
