Introduction
The Canon PIXMA TR4720 is an all-in-one printer that offers excellent print quality, scanning, copying, and faxing capabilities. One of its most convenient features is its Easy Wireless Connect function, which allows users to set up WiFi connectivity effortlessly. This guide provides step-by-step instructions to canon tr4720 setup using various methods.
Pre-Requisites
Before starting the setup, ensure you have the following:
- A stable WiFi network (2.4GHz recommended)
- The SSID (WiFi network name) and password
- A smartphone, tablet, or computer to complete the setup
- The Canon PIXMA TR4720 printer powered on
Method 1: Using Easy Wireless Connect via Control Panel
Step 1: Turn on the Printer
Ensure that your Canon PIXMA TR4720 is powered on. If the screen is blank, press the power button.
2: Activate Easy Wireless Connect Mode
- Press the Setup button on the printer’s control panel.
- Use the navigation buttons to select Wireless LAN Setup and press OK.
- Select Easy Wireless Connect and press OK.
- A message will appear stating that the printer is preparing for connection.
3: Complete Setup Using a Device
Once Easy Wireless Connect is activated, use the Canon PRINT Inkjet/SELPHY app or a computer to finalize the connection.
Method 2: Connecting via Canon PRINT Inkjet/SELPHY App
Step 1: Download the Canon PRINT Inkjet/SELPHY App
- For smartphones and tablets, download the Canon PRINT Inkjet/SELPHY app from the App Store (iOS) or Google Play Store (Android).
- Open the app once installed.
2: Start Wireless Setup
- Tap Add Printer.
- Select Connect via Wi-Fi and follow the on-screen instructions.
3: Select the Printer
- Your mobile device will detect the Canon PIXMA TR4720 printer.
- Select the detected printer and proceed with the on-screen prompts.
4: Enter WiFi Credentials
- When prompted, enter your WiFi SSID and password.
- Confirm the settings and wait for the connection to establish.
- A confirmation message will appear once the connection is successful.
Method 3: Connecting via WPS (Wi-Fi Protected Setup)
Step 1: Enable WPS on Your Router
- Locate the WPS button on your router.
- Press and hold the WPS button for a few seconds.
2: Start WPS Mode on the Printer
- Press the WiFi button on the Canon PIXMA TR4720 printer.
- Select WPS (Push Button Method) and press OK.
3: Establish Connection
- The printer will search for the router’s WPS signal.
- Once detected, it will automatically connect to the network.
- A successful connection message will appear on the screen.
Method 4: Connecting via a Computer (Windows/Mac)
Step 1: Download and Install Canon Drivers
- Visit the Canon Support Website and download the latest drivers for the PIXMA TR4720.
- Run the installer and follow the prompts.
2: Select Wireless Connection
- During installation, choose Wireless LAN Connection as your setup method.
- Follow on-screen instructions to detect and select your WiFi network.
3: Complete the Installation
- Enter the WiFi password if prompted.
- Wait for the connection to establish.
- Once connected, print a test page to confirm the setup.
Troubleshooting WiFi Connection Issues
If you encounter difficulties connecting your Canon PIXMA TR4720 to WiFi, consider the following troubleshooting tips:
1. Verify WiFi Credentials
Ensure you’re entering the correct SSID and password.
2. Restart Devices
Power off and restart your printer, router, and device before retrying the connection.
3. Check Signal Strength
Move the printer closer to the router to improve signal strength.
4. Disable Firewall or Antivirus Temporarily
Some security software may interfere with the connection process.
5. Reset Network Settings
If all else fails, reset the printer’s network settings and attempt the setup again:
- Press Setup > Device Settings > Reset Settings.
- Select Reset Network Settings and confirm.
Conclusion
The Canon PIXMA TR4720’s Easy Wireless Connect feature simplifies the WiFi setup process, allowing seamless printing from multiple devices. Whether using the control panel, Canon PRINT Inkjet/SELPHY app, WPS method, or a computer, the setup process is straightforward. If any connectivity issues arise, troubleshooting techniques such as verifying credentials, restarting devices, and resetting network settings can help resolve them. Once connected, users can enjoy the convenience of wireless printing with their PIXMA TR4720 printer.